Cementing Equipment

 

 

 

 

Edge Coater - EC Series

 

The EC model is an edge gluer, which is a gluing machine designed for adhesive application along the edge of a part.

 

This type of gluing machine has open end (cantilevered) rollers that allow adhesive application to either the edge of a sheet or to the full surface (up to the width of the gluing machine).


The adhesive coating thickness is adjusted by means of a dial which controls the gap between the pickup roller that sits in the glue tank and the coating application roller.


The standard machine can glue parts from paper thickness to ¼ thick, but an optional model with floating feed roll can be used for adhesive application to parts up to 2" thick.


 

 




_________________________________________________________________________________

Hot Melt Roll Coater - RT Series

 

RT hot melt roll coaters are adhesive application machines used to apply hot melt adhesive to sheets of material up to 38 inches wide. These hot melt roll coaters have a large adhesive reservoir and a powered feed roller system for coating thin parts and wide sheets.

 

The feed roll can be released and pivoted out of the way to make the RT an open roller coating machine for hand-held parts. The feedroll system on the Schaefer RT is adjustable to allow coating of parts as thin as .020, and as thick as 6".

 

The machine is equipped with variable speed drive, and also has a simple adjustment for coating thickness. Adhesive temperature is controlled by an electronic temperature control and solid state circuitry. Hotmelt adhesive can be added by simply raising the feedtable and loading fresh adhesive to the melt chamber.

 

_________________________________________________________________________________

Thermo 82

 

Hot Melt Thermo Coater model 82

 

Available in 150mm, 300mm, 450mm and 610mm coating width.